| Cold
Air Intake Install |
 |
Adding
a cold air intake to your car is a great way to start
increasing your horsepower. These instructions
outline the general process of installing an aftermarket
intake on the average vehicle. Once you understand
the general installation methods, adapting the installation
techniques to your vehicle should come very easy!
The install on our page done on a Honda Del Sol is one
of the more complicated installs. |
|
| Intake
Sensor ECU Mod |
 |
The
Intake Sensor ECU mod is a great way to easily add a
few extra horsepower. This mod advances your cars
timing by 1-2 degrees thus increasing your air/fuel
intake ratio. The mod is recommended for race
use only and should be used with premium unleaded gasolines
of at least 90 octane or higher. This mod can
be completed on any fuel injected vehicle and installs
and removes in less than 5 minutes. |
|
| NOS
Install |
 |
Adding
a NOS system to your car is a great way to drastically
increase your performance at a fairly affordable price.
NOS systems are available for almost all makes and vehicle
models and can be installed effectively in a variety
of different ways. These instructions will serve
as a general guidline for the install. |
|
| Headers
Install |
 |
Headers
are a great complement to an aftermarket cold air intake
and exhaust system. They will increase airflow and
free up lost power while giving your vehicle a much throatier
sound. Headers are available for most vehicles and
can be installed fairly easily on most vehicles.
Our step-by-step walkthrough instructions will give you
a good idea how the install takes place on one of our
members vehicles. |
|
| Porting
and Polishing Instructions |
 |
Our
porting and polishing page will give you a good idea how
to complete this mod on your own vehicle. Porting
and Polishing your Intake Manifold, Exhaust Manifold,
and Combustions chambers will give you much better airflow
and increase horsepower on almost any vehicle. This
procedure can be completed with simple hand and power
tools and can be finished within a few hours. |
|
| Polished
Valve Covers |
 |
Our
porting and polishing page will give you a good idea how
to complete this mod on your own vehicle. Porting
and Polishing your Intake Manifold, Exhaust Manifold,
and Combustions chambers will give you much better airflow
and increase horsepower on almost any vehicle. This
procedure can be completed with simple hand and power
tools and can be finished within a few hours. |
|
| Custom
Home Made Turbo Install |
 |
A
turbo will give just about any car a great boost in power.
Many aftermarket turbo's are much to expensive for the
average person. These instructions will show you
how to build and install your own custom turbo with cheaper
used parts. The instructions include the
step-by-step install and can be applied to most import
and domestic vehicles. Total cost including all parts
is from $1000 and up. |
|
| |
|
