In this section you will find everything you need to make your Probe faster.  There is an enormous amount of performance mods that can be done to the 93-97 Probes.  From adding a Cat-back exhaust to a full Twin-Turbo System.  Your only limitations will be what you can afford!   

1993-97 Ford Probe GReddy Exhaust Install

The GReddy Cat-Back exhaust is without a doubt the best exhaust system available for the Probe. The exhaust will not only give you the most horsepower but will also give a very impressive and throaty performance sound. Installation is fairly simple but should be completed with the aid of an experienced mechanic.

1993-97 Ford Probe KLZE Engine Upgrade

The J-Spec KLZE engine is the base engine that was installed on the Probes and MX6's in the Japanese market. The engine pushed out 200hp which is a pretty impressive gain over the stock 164hp engine. The engine will install directly in place of the old engine and is available from a variety of sources. May require emmission and egr custom fitment to pass emmissions test in Canada and the US. 

1993-97 Ford Probe Hotshot Headers Install

Installing Hotshot Headers on your Probe will give you a good boost in horsepower. Roughly, 8-10 horsepower can be achieved on most occasions. The headers will also give your car a much throatier exhaust tone. Step-by-step instructions guide you through the entire installation process.

1993-97 Ford Probe NOS Install

Installing a NOS system on your Probe will definitely give you the biggest bang for your buck. You can expect a 50-100 horsepower shot of NOS without too much trouble. This huge install guide shows the entire installation process in detail on the Probe. We highly recommend having an experienced tech install this for you.

1993-97 Ford Probe Custom Home Made Turbo Install

This walkthrough Includes detailed step by step instructions on installing a turbo on 1993-97 Ford Probe GT's.  The walkthrough contains a detailed parts list as well as colour step by step photos to guide you through your installation.  Save BIG $$$$ and install a custom Turbo yourself using components available from most auto wreckers!!!! 

1993-97 Ford Probe Intake Sensor Modification

The Intake Sensor Mod advances your timing by 1-2 degrees and will increase your air/fuel ratio.  Typical horsepower gains on the V6 Probe are between 4-8 horsepower.  Installation is very simple and straightforward.  Material costs are usually less than $5.00.  This page includes full colour instructions and diagrams on how to complete the mod successfully yourself and gain a quick 4-8 horsepower.